Tile Grout
Tile Grout
Product Descriptions
GRUTON Tile Grout is a polymer modified, cement-based tile joint filler used for filling the joints/ gap between the tiles. It effectively fills the gaps and gives water resistant, non-dusting tile joints. It is designed for grouting glazed, ceramic, porcelain, vitrified & fully vitrified tiles & natural stones.
GRUTON Tile Grout complies to CG2W requirements as per “BS EN 13888:2009 - Requirements, evaluation of conformity, classification and designation gouts for tiles and ISO 13007- Part 3: Terms, definitions and specifications for grouts”.
Area of Use
All types of ceramic tile, glazed tiles, porcelain tiles, vitrified & fully vitrified tiles, natural stones*, glass mosaic tiles.
Note :For highly absorbent natural stones/ marbles which may form a wet or colored patch when tile grout is applied, do sample test to check for possible staining. It is recommended to use suitable Gruton Impregnating sealer on all sides & mask the tiles before grouting.
Best results obtained when used in conjunction with Gruton Grout Admixure. The addition of Gruton Grout Admixure to cement based grouts will enhance adhesion to tile/stone edges, reduce water permeability and imparts flexibility which would be needed for wider gap up to 6mm, wet areas, commercial applications & external areas.
Features
- Easy to use & Clean - just mix with water, ready to use.
- Polymer modified - Crack free, minimum shrinkage & water resistance
- Suitable for varied tile and stones – All Ceramic, vitrified tiles, granites etc.
- Available in range of attractive colors
- Best results obtained when used in conjunction with Gruton Grout Admixure
- Low VOC - For healthy living.
